#MASS LOADED VINYL MAT INSTALL#
#MASS LOADED VINYL MAT PRO#
#MASS LOADED VINYL MAT ISO#

#MASS LOADED VINYL MAT INSTALL#

We sell numerous MLV soundproofing supplies to make your install go smoothly and. Mass Loaded Vinyl is an ideal sound blocking product because of its exorbitant weight and thin profile (1lb/sf, 1/8' thick). MLV could last anywhere between 20 30 years, depending on the quality of the brand. Mass Loaded Vinyl Soundproofing Barrier is installed as a way to add both limp mass and an air-tight barrier to a wall, floor, or ceiling.

Fitting to a vehicle and boot floor to prevent road rumble and help insulate the cabin. Rubber mats last up to 10 years, maybe even more if you take care of them properly. Dodo Barrier MLV is a 5kg/sq.m high quality mass loaded vinyl with a flexible composition perfect for automotive use.

Mat - 1.25m by 3m by 2mm thick - 5kg Membrane Mass Loaded Vinyl. (We recommed Dodo Tape for taping joints and edges) A thin, effective mineral mass loaded vinyl soundproofing mat sized 1.25m by 3m and 2mm. N.B Installation may require vinyl adhesive or taped edges.

Significant reduction in sound transmission.

#MASS LOADED VINYL MAT ISO#

Flammability tested for vehicle interiors ISO 3795:1989 Mass-loaded vinyl sound barrier can be used as a barrier for walls, floors and ceilings, thereby significantly increasing the quality of these surfaces.MLV Temperature Threshold = 90☌ continuous / 120☌ short.Mass Loaded Vinyl + Closed Cell Foam Layer.

#MASS LOADED VINYL MAT PRO#

Highly Recommended and ideal for use on the cabin floor, bulkhead and Boot floor.ĭodo Barrier Pro includes a closed cell foam layer to perfectly decouple the MLV from the panel and block the transmission of unwanted sound such as road, engine and exhaust noise.įor optimum performance use on vehicle panels that have been pre treated with sound deadening mats (e.g Dodo Dead Mat or Silent Coat). It can help make any car, van or 4x4 quiet and luxurious.

I'm happy with the way my 4x4 cargo van sounds (or doesn't) now.įWIW, I have a buddy that used rock wool instead of Thinsulate, cheaper but messier to install and seems to work well, and you can buy it at home repo.Vanstyle are pleased to offer a range of products from Dodo for superior sound deadening and vibration control to your vehicle.ĭodo Barrier Pro is a 5kg/sq.m mass loaded vinyl with an integrated CCF closed cell decoupling layer for automotive use.ĭodo Barrier Pro is designed to block and absorb unwanted sound waves. And the HF floor mats should be left in the sun for a day or two so it loses the smell.įor horizontal surfaces and the roof I used Noico and 3M Thinsulate, plus additional thermal CCF for temp control. I also used that layering wherever I could up front, and under the seats.įor clarification, I purchased MLV from a local supplier who glued a layer of CCF to one side, so that saved some time, but I spent about twice what you did. Commercial Acoustics Sound Barrier is a specially designed mass loaded vinyl product engineered to block the transmission sound waves. I also covered the wheel wells with Noico, then MLV, then the factory rubber covers. I then replaced the factory plywood floor and rubber mat.

As you know, MLV must be disconnected from the metal, so I used Harbor Freight foam floor pads to fill in the gullies, then the MLV, then another layer of CCF over it. I used it strictly on the floor and am happy with the results. Is the Mass Loaded Vinyl just an expensive way of saying rubber I wonder if there is any difference in gas flow resitivity specs I found a 100 rubber matt. It's only necessary if you want to squelch road and tire noise.

Mass loaded vinyl mat